Resin Bond Adhesive
|Rez N Bond is a fast acting water thin adhesive specially formulated for acrylics and styrene.|
|HYPO #25 APPLICATOR FOR WATER THIN GLUES FRAHP25|
|REZ-N-BOND GALLON SCHRBGL|
Rez N Bond is a fast acting water thin adhesive specially formulated for acrylics and styrene.
Why Choose Resin Bond?
• Methylene chloride bonding material
• Water thin
• Fast setting
• Non-flammable and non-corrosive
Specifically designed for use with Acrylic, CAB (cellulose acetate butyrate) and sign trim.
To achieve the best results when capillary cementing with typical methylene chloride-based solvent
cements or cyanoacrylate based cements, the following recommendations should be followed:
• Insure a smooth, clean, low stress edge.
• Apply cement along the entire length of the cement joint. Unlike with standard acrylic sheet,
the cement will not flow to the ends of the cement joint if the application of cement is started or
finished more than ¼” to ½” from the ends. Failure to fill the entire length of the cement joint
greatly reduces strength.
• Apply a generous amount of solvent cement to the surfaces being joined by: tipping the
vertical piece slightly so that its edge can accept more cement; using a larger diameter applicator
tip for increased cement flow; or providing space at the joint by shimming (0.002” - 0.004”)
Similar products: Rez N Bond
Available in Gallon size only
Can be applied with our Hypo #25 which is a 2 ounce bottle with needle applicator.
FRAHP25  HYPO 25 APPLICATOR EA